SECA® polyurethane timing belts are used open ended for linear motion and positioning, or spliced endless for synchronized conveying.
·         Resistant to moisture, grease, oil and gasoline
·         Resistant to ultraviolet light and ozone
·         Wide range of back coverings and weld-on profiles
·         Additional integral backing up to 2 mm
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Tensile Members

Width

Min Pulley

Min. Pulley Dia.

Minimum dia outside idler

Pitch

Width

H050S N/A Steel .024" (0.6 mm) dia. N/A 0.50 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 0.500 in
H075S N/A Steel .024" (0.6 mm) dia. N/A 0.75 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 0.750 in
H100S N/A Steel .024" (0.6 mm) dia. N/A 1.00 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 1.000 in
H150S N/A Steel .024" (0.6 mm) dia. N/A 1.50 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 1.500 in
H200S N/A Steel .024" (0.6 mm) dia. N/A 2.00 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 2.000 in
H300S N/A Steel .024" (0.6 mm) dia. N/A 3.00 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 3.000 in
H400S N/A Steel .024" (0.6 mm) dia. N/A 4.00 in N/A 14 teeth N/A 55.25 mm N/A 80 mm N/A 0.5 in N/A 4.000 in
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

From the Blog: