SECA® polyurethane timing belts are used open ended for linear motion and positioning, or spliced endless for synchronized conveying.
·         Resistant to moisture, grease, oil and gasoline
·         Resistant to ultraviolet light and ozone
·         Wide range of back coverings and weld-on profiles
·         Additional integral backing up to 2 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Tensile Members

Width

Min Pulley

Min. Pulley Dia.

Minimum dia outside idler

Pitch

Width

L037K N/A Kevlar .024" (0.6 mm) dia. N/A 0.37 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 0.370 in
L050K N/A Kevlar .024" (0.6 mm) dia. N/A 0.50 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 0.500 in
L075K N/A Kevlar .024" (0.6 mm) dia. N/A 0.75 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 0.750 in
L100K N/A Kevlar .024" (0.6 mm) dia. N/A 1.00 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 1.000 in
L150K N/A Kevlar .024" (0.6 mm) dia. N/A 1.50 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 1.500 in
L200K N/A Kevlar .024" (0.6 mm) dia. N/A 2.00 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 2.000 in
L300K N/A Kevlar .024" (0.6 mm) dia. N/A 3.00 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 3.000 in
L400K N/A Kevlar .024" (0.6 mm) dia. N/A 4.00 in N/A 12 teeth N/A 35.66 mm N/A 50 mm N/A 0.375 in N/A 4.000 in
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

From the Blog: