SECA® polyurethane timing belts are used open ended for linear motion and positioning, or spliced endless for synchronized conveying.
·         Resistant to moisture, grease, oil and gasoline
·         Resistant to ultraviolet light and ozone
·         Wide range of back coverings and weld-on profiles
·         Additional integral backing up to 2 mm
 
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Tensile Members

Width Tolerance

Thickness Tolerance

Min Pulley

Min. Pulley Dia.

Min Idler Pulley dia outside

25AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
32AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
50AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
75AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
100AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
120AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
150AT20S N/A Steel .048" (1.21 mm) dia N/A ±0.5 mm N/A ±0.15 mm N/A 18 teeth N/A 111.75 mm N/A 180 mm
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

From the Blog: