SECA® polyurethane timing belts are used open ended for linear motion and positioning, or spliced endless for synchronized conveying.
·         Resistant to moisture, grease, oil and gasoline
·         Resistant to ultraviolet light and ozone
·         Wide range of back coverings and weld-on profiles
·         Additional integral backing up to 2 mm
 
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Item #

Tensile Members

Width Tolerance

Thickness Tolerance

Min Pulley

Min. Pulley Dia.

Minimum dia outside idler

10T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
12T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
16T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
20T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
25T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
32T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
40T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
50T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
75T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
100T10K N/A Kevlar .024" (0.6 mm) dia N/A ±0.5 mm N/A ±0.2 mm N/A 12 teeth N/A 36.35 mm N/A 50 mm
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

From the Blog: